Model Number: SDL 10L~50L-#9335
Brand Name: Sidolim
Key Specifications/Special Features:
Specifications:SiDoLim in situ sterilizable fermentor (10-50L) system is a lab scale fermentor and designed for ease of useThermal heater is installed in the jacket of the fermentor vessel and not only the heater controls the temperature in the vessel but also it raises the temperature up to the sterilization temperature that it does not need the additional autoclave systemAs this system is designed in the spirit of plant system that the result from this system can be directly applied to the mass production schemeThis system can be used to develop new products in the laboratory of the university or venture companyResult of the wonderful product can be applied in the SiDoLim pilot scale system directly which is manufactured by Silver Double LimitedFeatures:1) Bench top, built-in peristaltic pumps2) Automated in-situ sterilizable fermenter3) Interchangeable vessels (10-50L)4) Integrated microprocessor controller
5) Easy to operate, wash and make maintenance as it has the open frame structure and uses stainless steel (SUS316L) plate
6) Built-in type heater makes to be self-sterilization procedures
7) pH, DO, temperature and rotation speed of the agitator are measured and controlled by the integrated controller system
8) Temperature of the vessel is measured by the RTD (Pt-100) and controlled by the digital PID control algorithm
9)150W DC servo motor is installed on the top of the head plate and the carbon-tungsten carbide mechanical seal protects the agitation system from the contamination
10) Rotation speed of the agitator is controlled from 50 to 1000rpm
11) Air driven diaphragm style valve protects from contamination and easy to wash and make maintenance
Vessel: stainless steel (SUS316L) is used to prevent contamination and rust
Water jacket system is adapted for precise temperature control
Sight glass makes to monitor the status of the media
Spare ports are installed on the head plate that the auxiliary sensors can be installed
Sensor ports are installed in the circumferential direction on the lower side of the vessel
Tips:
China factory for fermentor
Agitation |
Drive |
DC motor, AC gear motor top drive (mechanical seal driving) |
Range |
50-1000rpm, 1rpm |
Impellers |
turbine impeller (SUS316L) foam breaker (SUS316L) |
Sensor |
magnetic hall sensor |
Control |
microprocessor based PID control |
Materials and finish |
Vessel |
using 316L stainless steel it is polished mechanically and electrically |
Piping |
316L stainless steel prevent contamination and is polished |
O-rings/gaskets |
silicone material is used for the O-ring and the EPDM is used for gasket |
Sterilization |
built-in heater makers the in-situ sterilizing for the vessel, head plate, filter, aeration pipe lines, in 105-130 temperature range automatically |
Temperature |
Range (°) |
from 3°C above the cooling water temperature to 80°C (accuracy 0.1°C) |
Sensor |
RTD (Pt-100) |
Control |
built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the jacket |
Aeration |
Sparer |
ring sparer (SUS 316L) |
Intel filter |
cartridge type sterilizable pleated type 0.2μm absolute filter specifications (optional item) |
Out filter |
same as internal filter specifications (optional item) |
Control range |
different vessel size and/or ordered specifications |
Pressure control |
back pressure is controlled manually and/or automatically |
Control unit |
Panel |
8.5" graphic color LCD, membrane keypad |
Communications |
memory stick, printer, computer with the RS-232C communications protocol |
Controller board |
microprocessor based integrated controller board is adapted to measure, control and display the fermentation system |