Model Number: YL10460M-BL
Brand Name: Mealink
Key Specifications/Special Features:
One HDMI input distribute and extend to found display by four Cat6/7 CableExtend distance can be up to 60mSupports 3DSupports video output: 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480iAudio format supports: DTS-HD/Dolby-True HD/LPCM7.1/DTS/Dolby-AC3/DSD
LED status light: related LED light will go bright
Extend distance can be up to 60m
Support signal retiming
No loss of quality
Installs in minutes
TX uses 5V DC/3A power adaptor
Four RX: each one uses 5V/1A power adaptor
Output: output LED status light
Input/EDID: HDMI input LED status light
Power: power LED status light
EDID: key for reading the EDID info
Steps to use the switcher key:
It can read the EDID info of the incompatible display and then adjust to become compatible with the display that does not work
To connect the power adaptor with the power port of the HDMI 1X4 extender
To connect the HDMI output of the HDMI 1X4 extender with the HDMI input port of the display
To keep the display at working status and choose the matched HDMI input port
To press the switcher key at the HDMI 1X4 extender and the EDID read action finished while the input/EDID LED light goes green
It reads the EDID info of the output connected four display one by one, the first time that the light goes green means it is reading the EDID info of output 1 display, the second time that the light goes green means it is reading the EDID info of the output 2 display, the output 3 and output 4 follow this principle (it suggests to use the out 1 for the DVI display when output channel have both DVI and HDMI display)
To take the HDMI cable out and power off with the HDMI 1x4 extender, it can use as normal mode
Note: it can use HDMI-DVI cable for DVI Monitor
Step is same as above
To use one piece of HDMI cable to connect the HD source with the HDMI input port of the extender, the HDMI cable up to 15m
To use one pieces of cat6/7 for each distributed HDMI signal to connect the sender and receive, the distance between the sender and receiver most up to 60m
To use one HDMI cable to connect the RX with the display, HDMI cable length can be up to20m
To connect the attached powers at the receiver and sender
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.